Kingspan Therma TF70 Floorboard; high performance insulation for floors with a continuous thermal performance, lasting a constructions life cycle. Kingspan TF70, TW55 and TP10 are readily available in the following product thicknesses 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm. Thermafloor TF70 is a high performance, fibre free, rigid thermoset insulation core faced on both sides with a low emissivity composite foil facing which is used .
|Published (Last):||28 September 2010|
|PDF File Size:||7.12 Mb|
|ePub File Size:||17.27 Mb|
|Price:||Free* [*Free Regsitration Required]|
Kingspan Thermafloor TF70 is not suitable for installation directly over timber joists. Modified to include board facings, the boards achieve a resistance far greater than MN.
T70 TF70 20mm, 15 x 1. The top of the strip of insulation board should be level with the top of the floor screed and the bottom should be level with the bottom of the horizontal floor insulation, and closely butted up to it.
Product brochure Useful links Case studies. Order before 10am for next working day delivery.
The insulation core is resistant to short—term contact with petrol and with most dilute acids, alkalis and mineral oils. Thermafloor TF70 Download Download.
Kingspan TF70 50mm, 6 x 1. TF70, when subjected to British Standard fire tests, achieves the results given below. Kingspan K3 K3 superior performance phenolic boards for use in ground floors, or on supported or suspended concrete and timber floors.
Kingspan TF70 90mm, 3 x kijgspan. If you do not click “Accept and close” but continue to use this website: Measure the distance between the battens prior to cutting the boards as spacings can vary.
Kingspan TF70 25mm, 12 x 1. K Can reduce the cost kinspan related items — soil removal, service connections Unaffected by air infiltration Resistant to the passage of water vapour Easy to handle and install Ideal for new build and refurbishment Non—deleterious material Manufactured with a blowing agent that has zero ODP and low Iingspan.
In order to ensure insulation boards are flush with the top surface of the joists, they should be supported on minimum 25 mm x 25 mm treated softwood timber battens, proprietary galvanised steel saddle clips, or galvanised nails partially driven into the side of the joists. These kingsapn are faced on both sides with a low emissivity composite foil facing that is highly resistant to the transmission of water vapour.
Kingspan TF70, TW55 and TP10 are readily available in the following product thicknesses 20mm, kijgspan, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, mm, mm, mm and mm.
The size of the battens selected should ensure that, kngspan installed, the top surface of the insulation boards are flush with the top of the battens. Once the timber floor boards have been laid, temporary wedges should be inserted between the walls and the floor, to maintain tight joints, until the adhesive has set.
Specifications Useful links Case Studies. Installation in a Suspended Timber Floor Installation from Above the Td70 Joists The installation of Kingspan Thermafloor TF70 in suspended floor constructions should be carried out before commencement of floor boarding.
If two layers of insulation are required, they should be horizontally offset relative to each other so that, as far as possible, the board joints in the two adjacent layers do not coincide with each other see Figure Unfortunately, further to the recent supply rf70 with PIR and Phenolic insulation boards from Celotex, Kingspan, Ecotherm and Recticel, available stock of these product will vary throughout the country.
Presently there are no availability restrictions, apart from manufacturing lead-times and minimum quantity order levels on certain product sizes. The concrete slab and screed should be allowed to dry out prior to the the installation of the floor finish. Product Characteristics Kinsgpan Front Facings TF70 is faced on both sides with a low emissivity composite foil facing which is highly resistant to the transmission of water vapour.
To find out more about the cookies we use, or to change your cookie preferences i. Kingspan Insulation Ltd For queries relating to insulation boards, cavity closers or membranes. Any narrow gaps between a joist and perimeter wall should be insulated by specially cut pieces of board which in turn should be supported on blocks nailed to the underside of the joists.
The membrane should be brought up the surrounding foundation walls ff70 it is sufficiently above the height of the wall DPC so that it will connect klngspan or form the DPC. Ensure that insulation boards are fitted tightly between battens, and any gaps are filled with expanding urethane sealant.
Manufactured to order are the following thicknesses 45mm, 55mm, 65mm, 85mm, mm, mm, mm, mm and mm. Once the wedges are removed, they are replaced with kingsppan of cork or polyethylene foam to act as a compressible filler and to help prevent cold bridging. Kingspan TF70 40mm, 8 x 1.
Damaged boards or boards that have been in contact with harsh solvents or acids should not be used. It used to insulate solid concrete and suspended timber ground floors, and has a thermal conductivity of 0.
Click for more information.